Firmware Documentation
Welcome to the firmware documentation for the Coketo project. This section provides detailed information about the firmware used in our devices.
Table of Contents
Introduction
The firmware is the low-level software that controls the hardware of the device. It is essential for the proper functioning of the device and provides the necessary instructions for the hardware to operate.
Installation
To install the firmware, follow these steps:
- Download the latest firmware version from the official website.
- Connect your device to your computer using a USB cable.
- Open the firmware update tool and select the downloaded firmware file.
- Click on the "Update" button and wait for the process to complete.
Configuration
After installing the firmware, you may need to configure it to suit your needs. Refer to the configuration guide for detailed instructions on how to set up and customize the firmware settings.
Troubleshooting
If you encounter any issues with the firmware, refer to the troubleshooting section for solutions to common problems. You can also contact our support team for further assistance.
For more information, visit our support page.